Cover - Rear Seat Cushion - RH

Cover - Rear Seat Cushion - RH

Service Repair No - 78.40.04

Remove
1. Remove RH rear seats.





2. Remove 2 screws and remove seat belt reel cover.





3. Remove nut and release seat belt reel.





4. Remove 5 screws and remove both end covers.
5. Remove 3 Torx bolts and remove squab from cushion.





6. Release rear of cushion cover from frame.
7. Release sides and front of cushion cover from frame.
8. Release cover and pad from frame.





9. Remove 2 Torx bolts from seat belt and buckle and remove seat belt and buckle from frame.
10. Remove cushion cover and pad.





11. Remove and discard 17 hog rings and remove cover from pad.

Refit
1. Position cushion cover to cushion pad and secure to frame with hog rings in position noted during removal.
2 Position seat belt and buckle to frame and tighten to 32 Nm (24 ft. lbs.).
3. Fit squab cover and pad to frame.
4. Fit front and sides of cushion cover to frame.
5. Fit rear of cushion cover to frame.
6. Fit cushion to squab and tighten Torx bolts to 28 Nm (21 ft. lbs.).
7. Fit end covers and tighten screws.
8. Position seat belt reel in seat squab and tighten nut to 32 Nm (24 ft. lbs.).
9. Fit seat belt reel cover and tighten screws.
10. Fit rear seat.