Manual Mechanism - Lumbar Support - Front Seat

78.60.07 Manual Mechanism - Lumbar Support - Front Seat

Remove

1. Remove front seat.







2. Release and remove head restraint.
3. Remove recline control knob.
4. Release retaining studs from side covers and remove covers.
5. Remove 4 Torx bolts from squab frame and remove squab frame from cushion frame.
6. Remove lumbar control knob.







7. Release squab cover at base of seat frame.







8. Release squab cover from squab frame and squab pad.
9. Drill out 2 pop rivets from squab frame.







10. Remove both head restraint guide tubes.
11. Remove squab cover and pad from frame.







12. Remove 2 bolts from cable control and release cable control.
13. Release 8 lumbar support retainers from squab frame and collect 4 hook retainers.
14. Remove lumbar support mechanism.

Refit

1. Position lumbar support to squab frame and locate hook retainers.
2. Fit lumbar support retainers to squab frame.
3. Position cable control and tighten bolts.
4. Fit squab cover and pad to frame.
5. Fit head restraint guide tubes.
6. Position straps and secure with pop rivets.
7. Fit squab cover to squab pad and squab frame.
8. Secure squab cover at base of squab frame.
9. Fit lumbar support control knob.
10. Fit squab frame to cushion frame and tighten Torx bolts to 45 Nm (33 lbf.ft).
11. Fit side covers and secure retaining studs.
12. Fit head restraint.
13. Fit recline control knob.
14. Fit front seat.