Torque Specifications

Torque Specifications

Air Cleaner to Battery Tray Bolts 9 Nm (7 ft. lbs.)
Fuel Filler Neck to Body Nuts and Bolt 9 Nm (7 ft. lbs.)
Fuel Pump/Sender Unit to Tank Locking Ring 35 Nm (26 ft. lbs.)
Fuel Rail to Inlet Manifold Bolt 8 Nm (6 ft. lbs.)
Fuel Tank to Body Bolts 40 Nm (29 ft. lbs.)
Heated Oxygen (HO2S) Sensor 40 Nm (29 ft. lbs.)
Ignition Coils to LH Inlet Manifold Nuts and Bolts - KV6 - Up to 03MY 9 Nm (7 ft. lbs.)
Inertia (Fuel Cutoff) Switch 2 Nm (1.5 ft. lbs.)
Intake Air Control Valve (IACV) to Throttle Body Allen Screws 6 Nm (4.5 ft. lbs.)
Subframe to Body Bolts 190 Nm (140 ft. lbs.)
Throttle Housing to Inlet Manifold Bolts*
Stage 1 4 Nm (3 ft. lbs.)
Stage 2 9 Nm (7 ft. lbs.)
Throttle Body to Inlet Manifold Chamber Torx Screws (KV6) 8 Nm (6 ft. lbs.)
Throttle Actuator Support Bracket to Throttle Body to Torx Screws (vehicles with cruise control only) 9 Nm (7 ft. lbs.)
Throttle Position Sensor to Housing Torx Screws 1.5 Nm (1.1 ft. lbs.)
VIS Motor to Inlet Manifold Chamber Screws (KV6 only) 8 Nm (6 ft. lbs.)

*Tighten in sequence shown in procedural repair article