Arm - Wiper - Front

84.15.02 Arm - Wiper - Each

Service Repair No - 84.15.02

Remove





1. Remove nut cover on wiper arm and remove nut.
2. Remove wiper arm from spindle.

NOTE: Do not carry out further dismantling if component is removed for access only.

3. Remove wiper blade.

Refit
1. Fit wiper blade.
2. Fit wiper arm to spindle, with tip of wiper blade aligned to screen marks.
3. Fit nut and tighten to 18 Nm (13 ft. lbs.).