Plastic Sheet - Rear Door

76.34.28 Plastic Sheet - Rear Door

Remove
1. Remove rear door speaker.





2. Noting their fitted position, remove 7 trim stud retainers, 2 door pull screw retainers and 4 speaker screw retainers.
3. Release and discard plastic sheet.

Refit
1. Clean door contact area with white spirit.
2. Position NEW plastic sheet to door and seal in position, by applying hand pressure to center bottom of sheet first then move out from this point in both directions applying an even pressure to the seal, smooth out any creases.

CAUTION: It is crucial that no creases are present along the base of the plastic sheet.

3. Fit trim stud retainers and screw retainers to door.
4. Fit rear door speaker.