76.16.29 Cable Rod - Bonnet Lock Control

76.16.29 Cable Rod - Bonnet Lock Control

Remove
1. Remove bonnet lock.





2. Tie a draw string to end of bonnet release cable and pull cable from bonnet locking platform.
3. Untie draw string from bonnet release cable.





4. Remove 3 cable ties and release bonnet release cable from harness.





5. Remove bolt securing bonnet release lever to 'A' post lower panel.
6. Remove bonnet release cable from lever and remove lever.





7. Pull sound insulation away from bulkhead for access to bonnet release cable grommet.
8. Remove grommet from engine bulkhead.
9. Remove bonnet release cable.

Refit
1. Fit bonnet release cable through bulkhead.
2. Position bonnet release lever and connect bonnet release cable to lever.
3. Fit release lever to 'A' post and tighten bolt to 9 Nm (7 ft. lbs.).
4. Fit bonnet release cable grommet to bulkhead.
5. Position bonnet release cable to main harness and secure with cable ties.
6. Fit sound insulation to bulkhead.
7. Tie draw string to end of bonnet release cable.
8. Pull draw string to fit bonnet release cable through bonnet locking platform.
9. Untie draw string from bonnet release cable.
10. Fit bonnet lock.
11. Close bonnet and check for correct locking operation.