Trim Casing - Rear Door - Up To 04MY

Trim Casing - Rear Door - Up To 04MY

Service Repair No - 76.34.04

Remove





1. Remove screw securing door release escutcheon and remove escutcheon.
2. Remove 2 screws from door pull.
3. Release 10 trim studs securing trim casing to door.
4. Disconnect multiplug and remove door trim casing.

NOTE: Do not carry out further dismantling if component is removed for access only.





5. Remove 2 Torx screws securing window switch to door trim and remove window switch.
6. Remove 4 Torx screws securing door pull to trim casing and remove door pull.
7. Remove 4 Torx screws securing door speaker grille to trim casing and remove grille.
8. Release retainer and remove sill button guide.
9. Remove 10 trim studs from door trim.

Refit
1. Fit trim studs to casing.
2. Fit sill button guide to trim casing and secure with retainer.
3. Fit speaker grille to trim casing and secure with Torx screws.
4. Fit door pull to trim casing and secure with Torx screws.
5. Fit window switch to trim casing and secure with Torx screws.
6. Position door trim casing and connect window switch multiplug.
7. Fit trim casing to door and secure trim studs.
8. Fit screws to door pull.
9. Fit door release escutcheon and secure with screw.