12.65.41 Camshaft Timing Belt Cover-LH Front

12.65.41 Camshaft Timing Belt Cover-LH Front


Remove
1. Disconnect battery earth lead.
2. Remove ancillary drive belt. Service and Repair





3. Remove 3 Torx screws securing PAS pump pulley, and remove pulley.






4. Remove Torx screw securing idler pulley to front mounting plate and remove pulley.






5. Remove bolt securing dipstick tube to cylinder block.






6. Remove 3 bolts securing camshaft timing belt LH front cover and remove cover.

Refit
1. Clean LH front timing belt cover.
2. Position LH front timing belt cover, fit and tighten bolts to 4 Nm (3 ft lbs..
3. Position dipstick tube bracket to cylinder block and tighten bolt to 9 Nm (7 ft lbs).
4. Clean idler pulley, position pulley to engine front mounting plate and tighten Torx bolt to 45 Nm (33 ft lbs).
5. Position PAS pump pulley, fit and tighten Torx screws to 9 Nm (7 ft lbs).
6. Fit ancillary drive belt. Service and Repair
7. Connect battery earth lead.