Sensor - Thermostat Monitoring (TM) - KV6 - NAS

Sensor - Thermostat Monitoring (TM) - KV6 - NAS

Service Repair No - 18.30.21

Remove
1. Disconnect battery earth lead.
2. Remove coolant expansion tank cap to release pressure and refit cap.

WARNING: Since injury such as scalding could be caused by escaping steam or coolant, do not remove the filler cap from the coolant expansion tank while the system is hot.

3. Position absorbent cloth under TM sensor to collect spillage.





4. Disconnect multiplug from TM sensor.
5. Release and remove sensor. Discard seal.

Refit
1. Clean sensor and mating face.
2. Using a new seal, fit and secure sensor.
3. Connect multiplug to sensor.
4. Remove absorbent cloth.
5. Check for leaks and fill expansion tank to 'MAX' mark.
6. Connect battery earth lead.