Hood Latch Release: Service and Repair

Hood Latch Release Handle

Service Repair No - 76.16.30

Removal

1. Remove the cowl side trim panel.
2. Disconnect the hood release cable from the connecting box.
^ Open the connecting box cover.







3. Remove the hood release lever housing.
^ Remove the bolt.
^ Disconnect the hood release cable.







Installation

1. Install the hood release lever housing.
^ Connect the hood release cable.
^ Tighten the bolt to 5 Nm (3.7 lb.ft).

2. Attach the hood release cable to the connecting box.
^ Close the connecting box cover.

3. Install the cowl side trim panel.