Suspension Control Module: Service and Repair

Air Suspension Control Module

Service Repair No - 60.50.04

Removal
1. Driver side: Remove the cowl side trim panel.





2. Remove the closing trim panel.
^ Release the clip.
^ Remove the 2 screws.
^ Disconnect the electrical connector.





3. Remove the air suspension control module.
^ Disconnect the 4 electrical connectors.
^ Remove the bolt.
^ Release from the 2 clips.

Installation
1. Install the air suspension control module.
^ Secure with the clips.
^ Connect the electrical connectors.
^ Tighten the bolt to 9 Nm (7 ft. lbs.).
2. Install the closing trim panel.
^ Connect the electrical connector.
^ Secure the clip.
^ Tighten the screws.
3. Install the cowl side trim panel.
4. Initiate a new control module using T4.