Cabin Temperature Sensor / Switch: Service and Repair

In-Vehicle Temperature Sensor

Service Repair No - 82.20.93

Removal
1. Fully extend the steering column for access.
2. Remove the instrument panel access panel.
^ Release the 2 clips.





3. Remove the steering column upper shroud.
^ Release the 6 clips.





4. Remove the steering column lower shroud.
^ Remove the 3 Torx screws.
^ Release the steering column adjustment lever.





5. Remove the steering column side trim panel.
^ Release the clips.
^ Repeat the above procedure for the other side.





6. Release the steering column gaiter panel.
^ Remove the 2 Torx screws.
^ Release the 2 clips.





7. Remove the in-vehicle temperature sensor.
^ Release the 2 clips.
^ Disconnect the electrical connector.
^ Disconnect the hose.





Installation
1. Install the in-vehicle temperature sensor.
^ Connect the hose.
^ Connect the electrical connector.
^ Secure the clips.

2. Install the steering column gaiter panel.
^ Secure with the clips.
^ Tighten the Torx screws.

3. Install the steering column side trim panels.
^ Secure with the clips.

4. Install the steering column shrouds.
5. Install the instrument panel access panel.