Compressor/Pump: Service and Repair

Air Suspension Compressor

Service Repair No - 60.50.10

Removal
1. Using T4, depressurize the air suspension.

WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.





3. Remove the air suspension compressor lower cover.
^ Remove the 3 bolts.
^ Release the 5 clips.





4. CAUTION: Always plug any open connections to prevent contamination.

Remove the air suspension compressor.
^ Disconnect the 3 air lines.
^ Disconnect the 2 electrical connectors.
^ Remove the 3 bolts.

Installation

1. CAUTION: Make sure that the wiring harness and the air suspension pipes are not trapped behind the air suspension compressor bracket.

CAUTION: Make sure the air suspension compressor upper cover is correctly positioned.

NOTE: Install, but do not fully tighten the lower retaining bolts, before installing the upper retaining bolt.

Install the air suspension compressor.
^ Tighten the bolts to 10 Nm (7 ft. lbs.).
^ Connect the air lines.
^ Connect the electrical connectors.

2. CAUTION: Make sure the air suspension exhaust pipe is correctly located in to the air suspension upper cover.

Install the air suspension compressor lower cover.
^ Install the bolts and tighten to 9 Nm (7 ft. lbs.).
3. Using T4, pressurize the air suspension.