Front Axle Housing Support Insulator

Front Axle Housing Support Insulator

Service Repair No - 54.10.24








Special Service Tools

Removal

CAUTION: Make sure the bush is correctly aligned.

NOTE: Take note of the fitted position of the bush.

1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.
2. Remove the front wheels and tires.
3. Remove the front differential.





4. NOTE: Take note of the fitted position of the bush.

Using the special tools, remove the front axle housing support insulator.

Installation





1. CAUTION: Make sure the bush is correctly aligned.

Using the special tools, install the front axle housing support insulator.
2. Install the front differential.
3. Install the front wheels and tires.
^ Tighten the wheel nuts to 140 Nm (103 ft. lbs.).