Power Trunk / Liftgate Lock Actuator: Service and Repair

Liftgate Latch Actuator

Service Repair No - 86.26.27

Removal

1. Remove the tailgate trim panel.
2. Release the liftgate actuator.
^ Loosen the 2 bolts.
^ Disconnect the electrical connector.







3. Remove the actuator cover.
^ Remove the 2 Torx screws.







4. Remove the liftgate actuator.
^ Release the liftgate latch to actuator cable.







Installation

1. CAUTION: It is possible to incorrectly install the cable, ensure the ferrule and clip are fully engaged.

Attach the actuator to the liftgate latch cable.







2. Install the cover.
^ Tighten the Torx screws.

3. Install the liftgate actuator.
^ Tighten the bolts to 10 Nm (7 lb.ft).
^ Connect and secure the electrical connector.

4. Install the tailgate trim panel.