Front Seat Height Adjustment Motor

Front Seat Height Adjustment Motor

Service Repair No - 78.70.27

Removal

NOTE: Front seat height adjustment motor is supplied as part of the front seat frame assembly.

1. Remove the front safety belt buckle.
2. Remove the front seat cushion assembly.
3. Remove the front seat backrest assembly.
^ Release and disconnect the 2 electrical connectors.
^ Remove the 4 Torx bolts.







4. Remove the front seat electrical connector bracket.
^ Remove the 4 screws.







5. Remove the front seat tilt motor.
^ Release the 3 wiring harness clips.
^ Remove the 4 Torx bolts.







6. Remove the front seat position sensor.
^ Remove the 2 nuts.







7. Remove the front seat height adjustment motor.
^ Disconnect the electrical connector.
^ Remove the 8 nuts.







Installation

1. Install the front seat height adjustment motor.
^ Tighten the nuts to 25 Nm (18 lb.ft).
^ Connect the electrical connector.

2. Install the front seat position sensor.
^ Tighten the nuts to 4 Nm (3 lb.ft).

3. Install the front seat tilt motor.
^ Tighten the Torx bolts to 10 Nm (7 lb.ft).
^ Attach the wiring harness.

4. Install the front seat electrical connector bracket.
^ Tighten the screws.

5. Install the front seat backrest assembly.
^ Tighten the Torx bolts to 25 Nm (18 lb.ft).
^ Connect and secure the electrical connectors.

6. Install the front seat cushion assembly.
7. Install the front safety belt buckle.