Rear Seat - Vehicles With: 60/40 Split Seat

Rear Seat - Vehicles With: 60/40 Split Seat

Service Repair No - 78.10.70/78.10.71

Removal

NOTE: This procedure shows the removal and installation of both the LH and the RH seats.

1. NOTE: The Torx bolts can be re-used.

Release the RH rear seat.
^ Fold the LH seat cushion forward.
^ Remove the 4 Torx bolts.
^ Fold down the rear seat backrest.







2. Remove the RH rear seat.

3. NOTE: The Torx bolts can be re-used.

Release the LH rear seat.
^ Fold the LH seat cushion forward.
^ Remove the 6 Torx bolts.
^ Fold down the rear seat backrest.







4. With assistance, remove the LH rear seat assembly.

Installation

1. With assistance, install the LH rear seat assembly.
^ Position the seat on the dowels.

2. Secure the LH rear seat.
^ Return the seat backrest to the upright position.
^ Tighten the Torx bolts to 40 Nm (30 lb.ft).
^ Fold the seat cushion rearwards.

3. Install the RH rear seat.
^ Position the seat on the dowels.

4. Secure the RH rear seat.
^ Return the seat backrest to the upright position.
^ Tighten the Torx bolts to 40 Nm (30 lb.ft).
^ Fold the seat cushion rearwards.