Rear Wiper Pivot Arm

Rear Wiper Pivot Arm

Special Service Tools

General Purpose Puller 100-005A (LRT-99-500A):

General Purpose Puller
100-005A (LRT-99-500A)

Removal
1. Noting the fitted position and using the special tool, remove the rear wiper pivot arm.
^ Remove the nut cover.
^ Remove the nut.





NOTE: Do not disassemble further if the component is removed for access only.

2. Remove the wiper blade.
^ Release the clip.

Installation
1. To install, reverse the removal procedure.
^ Tighten the nut to 15 Nm (11 ft. lbs.).