Anti-Theft - Passive

Anti-Theft - Passive

Principles of Operation
For a detailed description of the Passive Anti-Theft System (PATS), refer to the relevant Description and Operation section.

Inspection and Verification
The best method to confirm the correct operation of the Passive Anti-Theft System (PATS) is to check the LED (located in the center of the instrument panel). The LED should illuminate solid for 3 seconds, when the ignition status is set to ON, and then extinguish. This validates all PATS functions (i.e. the key transponder matches a stored key code, the challenge/response sequence between the respective modules was successful resulting in the EMS being enabled).