Rear Subframe Front Bushing

Uni-Body, Subframe and Mounting System - Rear Subframe Front Bushing


This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures

Removal and Installation

Special Tool(s)







Removal

- NOTE: Removal steps in this procedure may contain installation details.

1. 1. WARNING: Make sure to support the vehicle with axle stands.

Raise and support the vehicle.

2. Remove both rear wheels and tires.
3. Remove the rear subframe assembly for access.

4. 4. CAUTIONS:
- Mark the components to aid installation.
- Special tool 204-598-01/8 is used to start the bushing removal process, and must be removed after the bushing has released, as it will not pass through the subframe bushing aperture.

Remove the bushing.

Special Tool(s): 204-598, 204-598-01







Installation

1. 1. CAUTIONS:
- Make sure the correct special tool is used to install the bushings to the correct depth.
- Make sure that the installation marks are aligned.

Install the bushing.

Special Tool(s): 204-598, 204-598-01







2. Install the rear subframe assembly.
3. Install the wheels and tires.