C-Pillar Trim Panel

C-Pillar Trim Panel

Service Repair No - 76.13.35

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. WARNING: Make sure that a new bolt is installed.

Release the safety belt lower anchor.

Torque: 40 Nm







2. Release the rear door seal.







3. Release the rear quarter trim panel.







4. WARNING: Make sure that a new bolt is installed.

Remove the C-pillar trim panel.

Torque: 3 Nm







5. NOTE: Do not disassemble further if the component is removed for access only.







Installation

1. To install, reverse the removal procedure.