Trunk / Liftgate Switch: Service and Repair

Power Liftgate Switch

Service Repair No - 86.65.04

Removal

1. Remove the liftgate trim panel.
2. Remove the license plate lamp housing.







3. Remove and discard the 6 license plate housing gaskets.







4. Remove the license plate lamps.







5. Remove the power liftgate switch.







Installation

1. Install the power liftgate switch.
2. Install the license plate lamps.
3. Install the license plate housing and tighten the nuts.

Torque: 5 Nm

4. Install the liftgate trim panel.