Camshaft, Lifters and Push Rods: Service and Repair

Camshafts

Service Repair No - 12.13.01

Removal

1. WARNING: Make sure to support the vehicle with axle stands.

Raise and support the vehicle.

2. Remove the cover and disconnect the battery ground cable.
3. Remove the camshaft bearing housing.

4. CAUTION: Extreme cleanliness must be exercised when handling this component.

Remove the intake camshaft.





5. CAUTION: Extreme cleanliness must be exercised when handling this component.

Remove the exhaust camshaft.





Installation

1. CAUTION: Extreme cleanliness must be exercised when handling these components.

Install the camshafts.

2. Check the valve clearances.
3. Install the camshaft bearing housing.
4. Connect the battery ground cable and install the cover.