Procedures

Engine Oil Draining and Filling

Service Repair No - 12.60.05

NOTE: Removal steps in this procedure may contain installation details.

1. WARNING: Make sure to support the vehicle with axle stands.

Raise and support the vehicle.

2. Remove the oil filter.
3. Remove the engine undershield.

4. WARNING: Avoid skin contact with the specified material.

CAUTION: Hot fluid.

CAUTION: Be prepared to collect escaping fluids.

Torque:
38 Nm

Remove and discard the sealing washer.





5. CAUTION: Make sure that the component is clean, free of foreign material and lubricant.

CAUTION: Make sure that new sealing washers are installed.

To install, reverse the removal procedure.

6. Check and top-up the engine oil.