Exhaust System: Service and Repair
Exhaust SystemService Repair No - 30.10.01
Removal
WARNING: Observe due care when working near a hot exhaust system.
NOTE: Removal steps in this procedure may contain installation details.
All vehicles
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
Vehicles with petrol engine
2. Torque:
25 Nm
Vehicles with diesel engine
3. Torque:
40 Nm
All vehicles
4. WARNING: This step requires the aid of another technician.
Vehicles with petrol engine
5. Remove and discard the gasket.
All vehicles
6. NOTE: Do not disassemble further if the component is removed for access only.
Remove the rubber mounts.
Installation
1. To install, reverse the removal procedure.