Fluid Filter - A/T: Service and Repair

Transmission Fluid Pan, Gasket and Filter

Removal

1. Remove the cover and disconnect the battery ground cable.

2. WARNING: Make sure to support the vehicle with axle stands.

Raise and support the vehicle.

3. Drain the transmission fluid.
4. Remove the front subframe assembly.

5. CAUTION: Be prepared to collect escaping oil.





6. Remove the gasket.

Installation

1. For sealant specification, refer to the specifications.
2. Apply a bead of sealant, 3 mm diameter, to the area indicated.





3. Install the fluid pan.

Torque:
14 Nm

4. Install the front subframe.
5. Connect the battery ground cable and install the cover.
6. Refill the transmission with fluid.