Ride Height Sensor: Service and Repair

Rear Suspension Height Sensor

Service Repair No - 64.36.01

Removal

NOTE: This sensor is only fitted to vehicles with Xenon headlamps and is installed on the LH side of the vehicle.

NOTE: Removal steps in this procedure may contain installation details.

1. WARNING: Make sure to support the vehicle with axle stands.

Raise and support the vehicle.

2. Remove the wheel and tire.

3. Torque:
10 Nm








Installation

1. To install, reverse the removal procedure.
2. Using Land Rover approved diagnostic equipment, calibrate the sensor.