Torque Specifications
Torque SpecificationsCatalytic Monitor Sensor 45 Nm (33 ft. lbs.)
Catalytic Converter to Exhaust Manifold Bolts* 30 Nm (22 ft. lbs.)
Catalytic Converter to Center Muffler Nut and Retaing Clamps 24 Nm (18 ft. lbs.)
Exhaust Manifold Bolts 24 Nm (18 ft. lbs.)
Exhaust Manifold Heatshield Bolts 10 Nm (7 ft. lbs.)
Exhaust Support Brackets to Front Subframe/Floor Bolts 24 Nm (18 ft. lbs.)
Exhaust Support Bracket to Center Bearing Carrier Bolts 24 Nm (18 ft. lbs.)
Exhaust Tail Pipe Trim Screws 3 Nm (2 ft. lbs.)
Front Muffler Service Sleeve Clamp Nuts 40 Nm (28 ft. lbs.)
Heated Oxygen Sensor (HO2S)** 45 Nm (33 ft. lbs.)
*It is not appropriate to either fit or remove these fixings using air tools due to risk of cold welding/snapping.
**Apply anti-seize lubricants to threads of sensor
-Refer to procedures for correct torque sequences