Floor Console Upper Panel
Floor Console Upper Panel (76.25.11)
Removal
1. Remove the ride and handling optimization switch assembly.
2. Remove both cup holder inserts.
3. Remove the floor console liner.
4. Remove the parking brake switch.
^ Remove the plastic insert.
^ Remove the screw.
^ Disconnect the electrical connector.
5. Remove the floor console upper panel.
^ Open the cubby box lid.
^ Remove the rubber insert.
^ Remove the plastic insert.
^ Remove the screw.
^ Release the 8 clips.
Installation
1. Install the floor console upper panel.
^ Tighten the screw.
^ Install the rubber insert.
^ Install the plastic insert.
2. Install the parking brake switch.
^ Connect the electrical connector.
^ Install the screw.
^ Install the plastic insert.
3. Install the floor console liner.
4. Install both cup holder inserts.
5. Install the ride and handling optimization switch assembly.