Glove Compartment: Service and Repair

Glove Compartment

Service Repair No - 76.52.03

Special Service Tools







Removal

1. Remove the cowl side trim panel.
2. Remove the closing trim panel.
^ Release the clip.
^ Remove the 2 screws.
^ Disconnect the electrical connector.







3. Open the glove compartment to the service condition.
^ Release the glove compartment latch stops.







4. CAUTION: If the hinge pin will not release, rotate the pin through 90 degrees to aid removal.

Using the special tool, remove the glove compartment.
^ Apply pressure to the head of the hinge pin and install the special tool. Remove the hinge pin.
^ Repeat the above procedure for the remaining hinge pin.







Installation

1. Install the glove compartment.
^ Install the hinge pins.

2. Close the glove compartment.
^ Secure the latch stops.

3. Install the closing trim panel.
^ Connect the electrical connector.
^ Secure the clip.
^ Tighten the screws.

4. Install the cowl side trim panel.