Headliner: Service and Repair

Headliner

Service Repair No - 76.64.15

Removal

1. Remove both A-pillar upper trim panels.
2. Remove both B-pillar upper trim panels.
3. Remove both C-pillar upper trim panels.
4. Remove both D-pillar upper trim panels.
5. Remove the front overhead console.
^ Carefully release the 7 clips.
^ Disconnect the 3 electrical connectors.







6. Remove the rear overhead console.
^ Carefully release the 9 clips.
^ Disconnect the 2 electrical connectors.







7. Disconnect the RH A-pillar electrical connector.







8. Remove the sun visor.
^ Remove the cover.
^ Remove the 2 screws.
^ Release from the clip.
^ Disconnect the electrical connector.
^ Repeat the above procedure for the other side.







9. Remove the sun visor retaining clip.
^ Release the screw cover.
^ Remove the screw.
^ Repeat the above procedure for the other side.







10. Remove the passenger assist handle.
^ Release the 2 screw covers.
^ Remove the 2 screws.
^ Repeat the above procedure for the remaining 5 handles.







11. Position the front seats fully forward.
12. Position the rear seats fully forward.
13. Remove the rear headliner trim panel.
^ Release the 7 clips.
^ Disconnect the electrical connector.







14. Disconnect the headliner wiring harness rear electrical connector.







15. With assistance, carefully remove the headliner.
^ Release the 14 clips.







16. NOTE: Do not disassemble further if the component is removed for access only.

Remove the rear interior lamp.
^ Release the clip.
^ Disconnect the electrical connector.
^ Repeat the above procedure for the other side.







17. Remove the headliner wiring harness.







Installation

1. Install the headliner wiring harness.
^ Secure the wiring harness to the headliner.

2. Install the interior lamp.
^ Secure with the clip.
^ Connect the electrical connector.
^ Repeat the above procedure for the other side.

3. With assistance, carefully install the headliner.
^ Secure with the clips.

4. Connect the headliner wiring harness rear electrical connector.
5. Install the rear headliner trim panel.
^ Secure the clips.

6. Reposition the rear seats.
7. Reposition the front seats.
8. Install the passenger assist handles.
^ Install the screws.
^ Secure the screw covers.

9. Install the sun visors.
^ Install the clips.
^ Install the screws.
^ Install the screw covers.
^ Connect the electrical connectors.

10. Connect the RH A-pillar electrical connector.
11. Install the rear overhead console.
^ Connect the electrical connectors.
^ Carefully secure the clips.

12. Install the front overhead console.
^ Connect the electrical connectors.
^ Carefully secure the clips.

13. Install both D-pillar upper trim panels.
14. Install both C-pillar upper trim panels.
15. Install both B-pillar upper trim panels.
16. Install both A-pillar upper trim panels.