Operation CHARM: Car repair manuals for everyone.

C-Pillar Upper Trim Panel



C-Pillar Upper Trim Panel (76.13.35)

Removal

1. Fold down the rear seat backrest.
2. Release the door aperture weatherstrip.
3. Release the safety belt lower anchor.
^ Remove and discard the Torx bolt.

4. Release the upper trim access cover.
5. Remove the C-pillar upper trim panel.
^ Remove and discard the Torx screw.
^ Release the 4 clips.
^ Release the safety belt from the seat.







6. NOTE: Do not disassemble further if the component is removed for access only.

Remove the 4 clips from the C-pillar upper trim panel.







Installation

1. Install the clips to the C-pillar upper trim panel.
2. Install the C-pillar upper trim panel.
^ Attach the safety belt.
^ Secure with the clips.
^ Install a new Torx screw and tighten to 3 Nm (2 lb.ft).

3. Install the upper trim access cover.
4. Install the safety belt lower anchor.
^ Tighten the new Torx bolt to 40 Nm (30 lb.ft).

5. Install the door aperture weatherstrip.
6. Return the seat backrest to the upright position.