Throttle Body: Service and Repair
Throttle Body Gasket
Removal
1. Disconnect the battery ground cable.
2. Remove the engine cover.
3. Remove the air intake resonator
4. Remove the throttle body.
^ Remove the 4 bolts.
^ Remove and discard the throttle body gasket.
Installation
1. Install the throttle body.
^ Clean the components.
^ Install a new gasket.
^ Tighten the 4 bolts to 10 Nm (7 ft. lbs.).
2. Install the air intake resonator.
3. Install the engine cover.
4. Connect the battery ground cable.