Front Door Window Glass: Service and Repair

Front Door Window Glass

Service Repair No - 76.31.01

Special Service Tools







Removal

NOTE: The door glass should be lowered by approximately one third.

1. Carefully remove the outer waist seal.
^ Remove the 2 screws.
^ Release each end of the seal from the door frame.







2. Remove the front door window glass.
^ Using the special tool, release the 2 clips and lift the glass clear of the regulator.
^ Rotate the glass forwards and lift the glass from the door.







3. NOTE: Do not disassemble further if the component is removed for access only.

Remove the 2 door glass retaining clips.
^ Remove the 2 Torx screws.
^ Remove the 2 spacing washers.
^ Remove the 2 flat washers.
^ Note their fitted positions.







Installation

1. Install the 2 door glass retaining clips.
^ Install the spacing washers.
^ Install the 2 flat washers.
^ Tighten the Torx screws to 8 Nm (6 lb.ft).

2. Install the front door window glass.
^ Engage with each channel and secure in the clips.

3. Install the outer waist seal.
^ Install the screws.