Antenna: Service and Repair

Antenna

Removal
1. Disconnect the battery ground cable.
2. Remove the RH A-pillar upper trim panel.
3. Remove the RH B-pillar upper trim panel.
4. Remove the RH C-pillar upper trim panel.
5. Remove the RH sun visor.
^ Remove the screw covers.
^ Remove the 2 screws.
^ Release and disconnect the electrical connector.





6. Remove the sun visor retaining clip.
^ Release the screw cover.
^ Remove the screw.





7. Remove the RH passenger assist handles.
^ Carefully release the 6 screw covers.
^ Remove the 6 screws.





8. Release the RH side of the headliner.
^ Release the 6 clips.





9. Remove the alarm antenna.
^ Disconnect the electrical connector.
^ Remove the 2 bolts.





Installation
1. Install the alarm antenna.
^ Connect the electrical connector.
^ Tighten the bolts to 10 Nm (7 ft. lbs.).

2. Secure the RH side of the headliner.
^ Carefully secure the clips.

3. Install the RH passenger assist handles.
^ Install the screws.
^ Install the screw covers.

4. Install the sun visor retaining clip.
^ Install the screw.
^ Install the screw cover.

5. Install the RH sun visor.
^ Connect and secure the electrical connector.
^ Install the screws.
^ Install the screw covers.

6. Install the RH C-pillar upper trim panel.
7. Install the RH B-pillar upper trim panel.
8. Install the LH A-pillar upper trim panel.
9. Connect the battery ground cable.