Exhaust Pipe: Service and Repair

Tailpipe

Service Repair No - 30.10.22





Special Service Tools
Removal

1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.





2. Remove the tail pipe.
^ Using 100-051, cut the tail pipe at the point indicated by a depression in the pipe.
^ Disconnect from the exhaust hanger.

Installation

1. NOTE: Do not tighten the retaining clamp at this stage.

Install the tail pipe.
^ Clean the components.
^ Install the retaining clamp.
2. Align the tail pipe and tighten the retaining clamp to 55 Nm (40 ft. lbs.).