Engine - Revised Engine Removal/Installation Procedure

No.: LTB00119

Issue: 1

Date: 10 MAR 2008

SECTION: 303

Revised Workshop Procedure - Remove / Install Engine and Ancillaries

AFFECTED VEHICLE RANGE:

LR3 (LA) 4.4L V8 Only VIN: 5A000360 - Onwards
Model Year: 2005 - Onwards

CONDITION SUMMARY:

Situation:

The removal / installation procedure for 4.4L V8 engine and ancillaries has been revised. The removal of the right-hand driveshaft, engine compartment cover and radiator is no longer required as there is adequate clearance between the engine oil pan and driveshaft for the engine to be moved forward before lifting.

Action:

When removing / installing the engine and ancillaries, refer to the revised Repair Procedure as outlined below

PARTS:

No parts required

TOOLS:

No special tools required





WARRANTY:

NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time. Other SROs affected by this procedure will also change.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

REPAIR PROCEDURE

REMOVING / INSTALLING ENGINE (4.4L)

NOTE:
Global Technical Reference (GTR) lookup sequence is as follows:

GTR Home> NAS > LA - LR3> Service Information> Model Year> Workshop Manuals> 3: Powertrain > 301-01B: Engine 4.4L

1. Refer to Workshop Manual (GTR) Section 301-01B: Engine 4.4L for the removal / installation procedure





Disclaimer