Power Trunk / Liftgate Lock Actuator: Service and Repair

Tailgate Latch Actuator

Removal
1. Remove the tailgate upper trim panel.
^ Remove the 6 screw covers.
^ Remove the 6 screws.





2. Remove the tailgate latch assembly.
3. Remove the tailgate latch actuator.
^ Release the access cover.
^ Disconnect the electrical connector.
^ Remove the bolt.





Installation
1. Install the tailgate latch actuator.
^ Tighten the bolt to 25 Nm (18 ft. lbs.).
^ Connect the electrical connector.
^ Secure the access cover.
2. Install the tailgate latch assembly.
3. Install the tailgate upper trim panel
^ Install the screws.
^ Install the screw covers.