Trunk / Liftgate Latch: Service and Repair

Liftgate Latch

Service Repair No - 76.37.19

Removal

1. Remove the liftgate upper trim panel.
2. Release the liftgate latch.
^ Remove the 4 screws.







3. Remove the liftgate latch.
^ Disconnect the electrical connector.







4. NOTE: Do not disassemble further if the component is removed for access only.

Disconnect the manual release cable.

5. Remove the liftgate latch bracket.
^ Remove the 3 screws.

Installation

1. Install the liftgate latch bracket.
^ Tighten to 10 Nm (7 ft. lbs.).

2. Connect the manual release cable.

3. Install the liftgate latch.
^ Connect the electrical connector.
^ Tighten to 10 Nm (7 ft. lbs.).

4. Install the liftgate upper trim panel.
5. Adjust the liftgate striker.