Floor Console Extension

Floor Console Extension

Removal

1. Remove the LH floor console extension.
^ Remove the screw.
^ Release the 2 clips.







2. NOTE: Do not disassemble further if the component is removed for access only.

Remove the floor console extension trim panel.
^ Remove the rubber isolator.
^ Remove the 6 screws.
^ Remove the 2 clips.







Installation

1. Install the floor console extension trim panel.
^ Install the rubber isolator.
^ Install the 6 screws.
^ Install the 2 clips.

2. Install the LH floor console extension.
^ Secure the 2 clips.
^ Tighten the screw.