Overhead Console

Overhead Console

Service Repair No - 76.25.02

Removal

1. Release the overhead console.
^ Open the sunglasses compartment.
^ Remove the 2 screws.
^ Release the 6 clips.







2. Remove the overhead console.
^ Disconnect the 4 electrical connectors.







3. NOTE: Do not disassemble further if the component is removed for access only.

Remove the front interior lamp.
^ Release the 2 clips.

4. Remove the roof opening panel switch.
^ Carefully release the 2 clips.







5. Remove the overhead console blanking trim.
^ Release the 4 clips.

6. Release the tire pressure monitoring system receiver.
7. Remove the cellular phone microphone.
^ Release the 3 clips.

8. Remove the 4 clips from the overhead console.







Installation

1. Install the 4 clips to the overhead console.
2. Install the cellular phone microphone.
^ Secure the 3 clips.

3. Secure the tire pressure monitoring system receiver.
4. Install the overhead console blanking trim.
^ Secure the 4 clips.

5. Install the roof opening panel switch.
^ Secure in the 2 clips.

6. Install the front interior lamp.
^ Secure the 2 clips.

7. Install the overhead console.
^ Connect the 4 electrical connectors.

8. Secure the overhead console.
^ Secure the 6 clips.
^ Install the 2 screws.
^ Close the sunglasses compartment.