Rear Quarter Trim Panel

Rear Quarter Trim Panel

Service Repair No - 76.13.12

Removal

1. Open the liftgate.
2. Release the liftgate aperture seal.
3. Release the rear quarter trim panel.
^ Carefully release the 4 clips.







4. NOTE: Do not disassemble further if the component is removed for access only.

Remove the rear quarter trim panel.
^ Disconnect the electrical connector.







5. Remove the quarter panel speaker from the rear quarter trim panel.
^ Remove the 3 screws.

6. Remove the 4 clips from the rear quarter trim panel.







Installation

1. Install the 4 new clips to the rear quarter trim panel.
2. Install the rear quarter panel speaker to the rear quarter panel.
^ Install the 3 screws.

3. Install the rear quarter trim panel.
^ Connect the electrical connector.

4. Secure the rear quarter trim panel.
^ Secure the 4 clips.

5. Secure the liftgate aperture seal.