Exhaust Pipe: Service and Repair

Tailpipe

Service Repair No - 30.10.22

Special Service Tools





Removal

WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

1. Raise and support the vehicle.
2. Release the tail pipe.
^ Using 100-051, cut the tail pipe at the point indicated by a depression in the pipe.
^ Repeat the above procedure for the remaining pipe.





3. With assistance, remove the tail pipe.
^ Remove the 2 nuts.





4. Remove both rear exhaust hanger assemblies.





Installation
1. Install the rear exhaust hanger assemblies.

NOTE: Do not tighten the retaining clamps at this stage.

2. With assistance, install the tail pipe.
^ Clean the components.
^ Install the retaining clamps.

3. Align the tail pipe and tighten the retaining clamps to 55 Nm (40 ft. lbs.).