Pinpoint Test G1026981P4 : Front Seat Height, Tilt and/or Seat Extension Motor Movement Not Functioning

PINPOINT TEST G1026981p4 : Front Seat Height, Tilt And/or Seat Extension Motor Movement Not Functioning

G1026981t12 : Check front seat height, tilt or extension motor

1. Set ignition status to 'OFF'.
2. Disconnect front seat height, tilt or extension motor connector.

3. NOTE: It may be that the seat has been driven to the limit of travel along the relevant axis, and when the link harness is connected, the seat will remain in the same position. If this is the case, a jolt may be felt from the motor. To confirm the motor operation, swap the link harness to alternate motor pin connections and the seat should travel in the opposite direction.

Using a locally made fused link harness and power supply, connect power and ground to relevant motor.







^ Does the motor operate?

Yes
Using manufacturer approved diagnostic system, check for related Diagnostic Trouble Codes (DTCs) and carry out the repair operations specified. Alternatively, refer to the electrical circuit diagrams and check relevant motor circuits.

No
Replace the relevant motor.