Rear Parking Aid Sensor

Rear Parking Aid Sensor

Removal

CAUTION: Make sure damage does not occur to bumper cover. Failure to follow this instruction may result in damage to the vehicle.

NOTE: Access to the parking aid sensor is gained from the rear of the bumper cover.

1. Remove the rear parking aid sensor.
- Disconnect the electrical connector.







2. Remove the parking aid sensor trim panel.

Installation
1. Install the parking aid sensor trim panel.

CAUTION: Make sure damage does not occur to bumper cover. Failure to follow this instruction may result in damage to the vehicle.

2. Install the rear parking aid sensor.
- Connect the electrical connector.