Lumbar Control Switch

Lumbar Control Switch

Removal

NOTE: Front seat shown removed for clarity.

1. Position the front seat fully forwards.
2. Remove the safety belt lower anchor bolt cover.
1. Carefully release the clip from behind the front seat base side trim panel.
2. Remove the cover.







3. Carefully release the front seat base side trim panel.
^ Remove the 2 screws.
^ Release the 6 clips.







4. NOTE: Safety belt shown removed for clarity.

Disconnect the lumbar control switch electrical connector.







5. Remove the lumbar control switch.
1. Release the 2 clips.
2. Remove the switch.







Installation

1. Install the lumbar control switch.
^ Install the switch.
^ Secure the 2 clips.

2. Connect the lumbar control switch electrical connector.
3. Carefully install the front seat base side trim panel.
^ Secure the 6 clips.
^ Install the 2 screws.

4. Install the safety belt lower anchor bolt cover.
5. Reposition the front seat to the original position.