Yaw Rate Sensor: Service and Repair
Yaw Rate SensorService Repair No - 70.70.35
Removal
1. Disconnect the battery ground cable.
2. Remove the auxiliary heater core and evaporator core housing.
3. Remove the yaw rate sensor.
^ Disconnect the electrical connector.
^ Remove the 2 bolts.
Installation
1. Install the yaw rate sensor.
^ Install the 2 bolts and tighten to 7 Nm (5 ft. lbs.).
^ Connect the electrical connector.
2. Install the auxiliary heater core and evaporator core housing.
3. Connect the battery ground cable.