Cabin Temperature Sensor / Switch: Service and Repair

In-Vehicle Temperature Sensor

Removal
1. Fully extend the steering column for access.
2. Remove the instrument panel access panel.
- Release the 2 clips.







3. Remove the steering column upper shroud.
- Release the 6 clips.







4. Remove the steering column lower shroud.
- Remove the 3 Torx screws.
- Release the steering column adjustment lever.







5. Remove the steering column side trim panel.
- Release the clips.
- Repeat the above procedure for the other side.







6. Release the steering column gaiter panel.
- Remove the 2 Torx screws.
- Release the 2 clips.







7. Remove the in-vehicle temperature sensor.
- Release the 2 clips.
- Disconnect the electrical connector.
- Disconnect the hose.







Installation
1. Install the in-vehicle temperature sensor.
- Connect the hose.
- Connect the electrical connector.
- Secure the clips.

2. Install the steering column gaiter panel.
- Secure with the clips.
- Tighten the Torx screws.

3. Install the steering column side trim panels.
- Secure with the clips.

4. Install the steering column shrouds.
5. Install the instrument panel access panel.