Power Trunk / Liftgate Lock Switch: Service and Repair

Power Liftgate Switch
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures

Removal
1 Remove the liftgate trim panel.
For additional information, refer to Liftgate Trim Panel Service and Repair




2 Remove the license plate lamp housing.




3 Remove and discard the 6 license plate housing gaskets.




4 Remove the license plate lamps.




5 Remove the power liftgate switch.

Installation
1 Install the power liftgate switch.
2 Install the license plate lamps.
3 Install the license plate housing and tighten the nuts.
Torque to: 5 Nm
4 Install the liftgate trim panel.
For additional information, refer to Liftgate Trim Panel Service and Repair