Power Trunk / Liftgate Lock Actuator: Service and Repair

Liftgate Latch Actuator

Removal
1 Remove the tailgate trim panel. For additional information, refer to Tailgate Trim Panel Tailgate Trim Panel




2 Release the liftgate actuator.
- Loosen the 2 bolts.
- Disconnect the electrical connector.




3 Remove the actuator cover.
- Remove the 2 Torx screws.




4 Remove the liftgate actuator.
- Release the liftgate latch to actuator cable.

Installation





1
CAUTION: It is possible to incorrectly install the cable, ensure the ferrule and clip are fully engaged.
Attach the actuator to the liftgate latch cable.
2 Install the cover.
- Tighten the Torx screws.
3 Install the liftgate actuator.
- Tighten the bolts to 10 Nm (7 lb.ft).
- Connect and secure the electrical connector.
4 Install the tailgate trim panel. For additional information, refer to Tailgate Trim Panel Tailgate Trim Panel